High performance cold finger V2A large S-K100-Z


  • gas cleaning by condensation e.g in vacuum systems


  • KF NW25 = Small flange NW25
  • special dimensions
  • special connections


  • baffles for optimized condensation
  • made of stainless steel 1.4301 (1.4404 on request)
  • good chemical resistance
  • good thermal resistance
  • simple low cost design
  • quick exchange is possible
  • two sections

Cold Trap, two Sections

A special version is the two section cold trap. It has a ISO-K 100 flange as the connection part. This type of cold trap enables the condensation area to be separated from the upper section of the cold trap. This ensures that the removal of the condensation and the cleaning of the cold traps can be carried out very easily. This version is also suitable for when a cold trap has to be permanently installed inside an apparatus, so that only the lower section of the cold trap has to be removed in order to empty out the condensation. The ISO-K 100 flange connecting piece is secured with 4 ISO-K-claw clamp stainless steel and this is included in our scope of delivery.


Tecnial Data Cold finger S-K100-Z

TypeCondensate capacityColant capacityfor Dewar Typecold finger connectionsArt. No.
Cold finger S-K100-Zapp. 1,5 l16/18 l 33C / DSS-D250/450KF NW 2517154
Spare partsArticle No.
Dewar made of glass Type 33C1244
Dewar made of stainless steel Type DSS-D250/4502407
Plastic ring for Type 3317155
Plastic ring for Type DSS-D250/45017156
CO2 wire bracket for Type 33C17157
CO2 wire bracket for Type DSS-D250/45017158
Claws for S-K100-Z17159
Centerring ring ISO-K10017160

Technical data sheet

Cold Trap Catalog as PDF:

Cold Trap Catalog as PDF: Download cold trap catalog