Accessories for reaction vessels

The temperature control jacket connection is available in three versions:

• Glass thread connection GL18:
  with plastic olives (PGT/PTFE) for hoses with an internal diameter of 10 mm.
  Inner diameter olive approx. 7mm
  Temperature range from -10°C to max. +120°C

• DN15 glass flange: Accessories

• DN25 glass flange: Accessories

up to max. 5L volume

This holder allows the lid or jar to be removed from the holder or the superstructure without dismantling the superstructure. The retaining rods can be used horizontally or vertically.

Solid design for fixed installation on a stand wall

Solid design for installation in support frame. Support frame material thickness: standard 27mm, 13mm or 30mm on request

The following information is required for this (see also layout diagram and example):

1. Stirrer type
   • Anchor stirrer with two arms: Order no. = AZ
   • Anchor stirrer with four arms: Order no. = AV
   • Propeller stirrer with three arms: Order no. = PD
   • Propeller stirrer with four arms: Order no. = PV
   • Second level, with additional Z: Order no. = **Z
    
2. Shaft diameter
   • 8 mm: Order no. = W8
   • 10 mm: Order no. = W10
   • 16 mm: Order no. = W16
3. Material
   • Glass: Order no. = G
   • V4A: Order no. = V
   • V4A: PFA-coated: Order no. = PFA
4. Vessel type
   • Order no. = TRGN****
   • or specification of the complete internal height and flange size
5. Lid type
   • Order no. = D****
   • or total lid height
6. Stirring cap used
   • Order no. = Art. no. of the stirrer cap
   • Type or order number

Example:

Item no.: PVZ – W16 – V – TRGN7197 – D4303 – 40466

1. Propeller agitator with four arms and a second level = PVZ
2. 16 mm shaft = W16
3. made of V4A = V
4. for reactor TRGN7197 = TRGN7197
5. Cover type D4303 = D4303
6. Stirring cap type RV 16/45 = 40466

The following information is required for this (see also layout diagram and example):

1. Stirrer type
   • Anchor stirrer with two arms: Order no. = AZ
   • Anchor stirrer with four arms: Order no. = AV
   • Propeller stirrer with three arms: Order no. = PD
   • Propeller stirrer with four arms: Order no. = PV
   • Second level, with additional Z: Order no. = **Z
    

    

    
2. Shaft diameter
   • 8 mm: Order no. = W8
   • 10 mm: Order no. = W10
   • 16 mm: Order no. = W16

   The following types are available for this purpose (shaft diameter to flange size):

3. Material
   • Order no. = B
4. Vessel type
   • Order no. = TRGN****
   • or specification of the complete internal height and flange size
5. Lid type
   • Order no. = D****
   • or total lid height
6. Stirring cap used
   • Order no. = Art. no. of the stirrer cap
   • Type or order number

Example:

Item no.: AZ – W8 – B – TRGN7168 – D4201 – 40451

1. Anchor agitator with two arms = AZ
2. 8 mm shaft = W8
3. made of V4A (PTFE coated) = B
4. for reactor TRGN7168 = TRGN7168
5. Cover type D4201 = D4201
6. Stirring valve type RVFE 8/29 = 40451

Agitator couplings (stainless steel) are used to compensate for vibrations between the agitator and agitator

for high torques made of stainless steel

for high torques made of stainless steel

made of stainless steel 1.4401 CrNiMo, with permanent magnets, absolutely gas-tight and vacuum-proof, resistant to acids and alkalis, max. Speed 2,500 rpm.

made of PTFE /PEEK, with permanent magnets, absolutely gas-tight and vacuum-proof, resistant to acids and alkalis, max. Speed 1,500 rpm.

The KGW agitator closure is suitable for both vacuum and overpressure applications. It has two separate PTFE lip seals that can be adapted for positive pressure or negative pressure applications by changing the installation position.

for PTFE-coated stirrers made of V2A

for PTFE-coated stirrers made of V2A

thermally insulated, with threaded connections M16x1 on both sides, suitable for standard threads of circulators, max. Operating temperature +300° C.