High-performance cold trap complete V2A large KF ISO-K100-Z
Application
Advantages
Executions
Two-part cold trap
A special design are two-part cold traps in the standard version, with an ISO-K 100 flange as the connecting part. With this cold trap, the condensate compartment can be separated from the upper part of the cold trap. This makes it very easy to remove the condensate and clean the cold trap. This version is also suitable for fixed installation of the cold trap in an appliance, as only the lower part needs to be removed from the cold trap to drain the condensate. The ISO-K 100 connector is secured with 4 ISO-K clamp screws.
Type KF ISO-K100-Z-33C with 33C
Technical data
Cold traps completely without CO2 grid
Type S-K100-Z
Type S-K100-Z
Type KF ISO-K100-Z-33C with 33C
Type KF ISO-K100-Z-DSS-D250/450 with DSS-D250/450
| Type | Condensate volume | Coolant volume | with Dewar type | Cooling finger connections | Best. No. |
|---|---|---|---|---|---|
| Cold trap ISO-K100-Z-33C | approx. 1.5 l | 16 l | 33C | KF NW 25 | 17150 |
| Cold trap ISO-K100-Z-DSS D250/450 | approx. 1.5 l | 18 l | DSS-D250/450 | KF NW 25 | 17151 |
Spare parts
| Spare parts | Best. No. |
|---|---|
| Cooling finger S-K100-Z | 17154 |
| Dewar made of glass type 33C | 1244 |
| Stainless steel dewar DSS-D 250/450 | 2407 |
| Support ring for type 33C | 17155 |
| Support ring for type DSS-D 250/45 | 17156 |
| Claws for S-K100Z | 17159 |
| O-ring with centering for ISO-K100 | 17160 |
Technical data cold trap complete ISO-K100-Z with CO2 grid
Type KF ISO-K100-Z-33CAL-CO2 with 33CAL
Type KF ISO-K100-Z-DSS-D250/450-CO2 with DSS-D250/450
| Type | Condensate volume | Coolant volume | with Dewar type | Cooling finger connections | Best. No. |
|---|---|---|---|---|---|
| Cold trap ISO-K100-Z-33CAL-CO2 | approx. 1.5 l | 16 l | 33CAL | KF NW 25 | 17152 |
| Cold trap ISO-K100-Z-DSS D250/450-CO2 | approx. 1.5 l | 18 l | DSS-D250/450 | KF NW 25 | 17153 |
Spare parts
Support ring with CO2 grid
Dewar with CO2 grid
| Spare parts | Best. No. |
|---|---|
| Cooling finger S-K100-Z | 17154 |
| Dewar made of glass type 33CAL | 1254 |
| Stainless steel dewar type DSS-D 250/450 | 2407 |
| Support ring for type 33 | 17155 |
| Support ring for type DSS-D250/450 | 17156 |
| CO2 grid for type 33 | 17157 |
| CO2 grid for type DSS-D250/450 | 17158 |
| Claws for S-K100Z | 17159 |
| O-ring with centering for ISO-K100 | 17160 |
Technical data sheet
Download cold trap catalog
Cold trap catalog as PDF: Download