Cold trap High-performance cold traps V2A large complete2024-07-29T07:25:59+00:00

High-performance cold trap complete V2A large KF ISO-K100-Z

Application

  • Gas purification by condensation, e.g. in vacuum systems

Advantages

  • made of stainless steel 1.4301 (1.4404 on request)
  • High thermal resistance
  • High thermal resistance
  • Simple, cost-effective design
  • Quick change possible
  • two-part

Executions

  • KF NW25 = small flange
  • Special dimensions
  • Special connections

Two-part cold trap

A special design are two-part cold traps in the standard version, with an ISO-K 100 flange as the connecting part. With this cold trap, the condensate compartment can be separated from the upper part of the cold trap. This makes it very easy to remove the condensate and clean the cold trap. This version is also suitable for fixed installation of the cold trap in an appliance, as only the lower part needs to be removed from the cold trap to drain the condensate. The ISO-K 100 connector is secured with 4 ISO-K clamp screws.

Technical data
Cold traps complete without CO2 grid

Type Condensate volume Coolant volume with Dewar type Cooling finger Connections Best. No.
Cold trap ISO-K100-Z-33C approx. 1.5 l 16 l 33C KF NW 25 17150
Cold trap ISO-K100-Z-DSS D250/450 approx. 1.5 l 18 l DSS-D250/450 KF NW 25 17151

Spare parts

Spare parts Best. No.
Cooling finger S-K100-Z 17154
Dewar made of glass type 33C 1244
Stainless steel dewar DSS-D 250/450 2407
Support ring for type 33C 17155
Support ring for type DSS-D 250/45 17156
Claws for S-K100Z 17159
O-ring with centering for ISO-K100 17160

Technical data cold trap complete ISO-K100-Z with CO2 grid

Type Condensate volume Coolant volume with Dewar type Cooling finger Connections Best. No.
Cold trap ISO-K100-Z-33CAL-CO2 approx. 1.5 l 16 l 33CAL KF NW 25 17152
Cold trap ISO-K100-Z-DSS D250/450-CO2 approx. 1.5 l 18 l DSS-D250/450 KF NW 25 17153

Spare parts

Spare parts Best. No.
Cooling finger S-K100-Z 17154
Dewar made of glass type 33CAL 1254
Stainless steel dewar type DSS-D 250/450 2407
Support ring for type 33 17155
Support ring for type DSS-D250/450 17156
CO2 grid for type 33 17157
CO2 grid for type DSS-D250/450 17158
Claws for S-K100Z 17159
O-ring with centering for ISO-K100 17160

Technical data sheet

Download cold trap catalog

Cold trap catalog as PDF: Download
 
Go to Top