Cold trap High-performance cold trap V2A large2024-05-17T09:38:03+00:00

High-performance cooling finger V2A large S-K100-Z


  • Gas purification by condensation, e.g. in vacuum systems


  • Baffles for optimized condensation
  • made of stainless steel 1.4301 (1.4404 on request)
  • High thermal resistance
  • Simple, cost-effective design
  • Quick change possible
  • Large condensate volume
  • two-part
  • Quick change possible


  • KF NW25 = small flange
  • Special dimensions
  • Special connections

Two-part cold trap

A special design are two-part cold traps in the standard version, with an ISO-K 100 flange as the connecting part. With this cold trap, the condensate compartment can be separated from the upper part of the cold trap. This makes it very easy to remove the condensate and clean the cold trap. This version is also suitable for fixed installation of the cold trap in an appliance, as only the lower part needs to be removed from the cold trap to drain the condensate. The ISO-K 100 connector is secured with 4 ISO-K clamp screws.

Technical data cooling finger S 54V

Type Condensate volume Coolant volume for Dewar type Cooling finger connections Best. No.
Cooling finger S-K100-Z approx. 1.5 l 16/18 l 33C / DSS-D250/450 KF NW 25 17154
Spare parts Order no.
Dewar made of glass type 33C 1244
Stainless steel dewar type DSS-D 250/450 2407
Support ring for type 33C 17155
Support ring for type DSS-D250/450 17156
CO2 grid for type 33C 17157
CO2 grid for type DSS-D250/450 17158
Claws for S-K100Z 17159
O-ring with centering for ISO-K100 17160

Download cold trap catalog

Cold trap catalog as PDF: Download

Go to Top